Carlson Rugged Tablet RT4 - RFID Reader Functionality

Page | 33
Carlson Software
DRAFT
RFID Reader
RFID Reader The RT4 Rugged Tablet with an RFID reader allows you to read UHF RFID
tags and easily import data into custom or standard programs running on
the RT4.
RFID Connector
The RFID Connector™ ulity is a program provided with the RFID reader.
Home Screen
When the RFID Connector ulity loads, the home screen appears. From
the home screen, you can do a Scan Test right away. Hold the RT4 with the
display facing you, and an RFID tag directly away from the back of the RT4.
Tap Scan on the screen. Aer a tag is successfully read, the Scan Data is
shown on the screen.
RFID Connector Menu
Select the menu symbol in the upper le hand corner of the home screen
or swipe the screen from le to right to see the menu (you can do this
from any screen in the applicaon). This menu gives you access to User
and Data Format seng screens.
User Sengs
From the menu, select User to open the User Sengs screen. From this
screen, set up opons like RFID Scan Time and which buon to use to scan
RFID tags.