Carlson Rugged Tablet RT4 - Page 34

34 | Page
Carlson RT4 User Manual
Opons
• Scan Time: determines the maximum me to aempt to scan for
before giving up. When the scan buon is pushed, the RFID scans unl
it nds a tag or unl this amount of me has elapsed.
• Power Level: Sets the power level of the module. The maximum
power level is determined by what region the RFID is congured for.
For America, it is 20 dBm, for the EU and Australia, it is 24 dBm. You
may specify higher power levels, up to 27 dBm, but the radio may
have to remain o for a period of me between scans.
• Worst Case O Time: If the power is set higher than the regulatory
threshold (20 or 24 dBm), this shows the maximum amount of me
that the radio will remain o before it will allow another scan.