Carpenter Model 860 Material Coiling Unit
Carpenter Model 860 Material Coiling Unit • Phone: (315) 682-9176 • Fax: (315) 682-9160
Website: www.carpentermfg.com • Email: wire@carpentermfg.com
Revised 05/09/2024 Page 27
3. After completion of the first piece of material, the display will read the following: “Press
foot switch or press STOP.” Press and release the foot switch assembly to continue
processing material, or press the STOP button to quit.
a. If the STOP button is pressed, the display will read the following: “STOP
activated, press ENTER to reset.”
4. When the programmed number of pieces is complete, the display will read the following:
“Processing complete, please press ENTER.”
To Next Page
Loading...