Carpenter Model 860 Material Coiling Unit
Carpenter Model 860 Material Coiling Unit • Phone: (315) 682-9176 • Fax: (315) 682-9160
Website: www.carpentermfg.com • Email: wire@carpentermfg.com
Revised 05/09/2024 Page 31
PN 9599 Foot Switch Assembly
The interface between the Model 360, Model 930, or Model 970 and the Model 860 may be
controlled by a PN 9599 foot switch assembly. This foot switch assembly connects to the
material processing machine, not directly to the Model 860.
For directions on operating the interface between the Model 360, Model 930, or Model 970 and
the Model 860 with the optional PN 9599 foot switch assembly, refer to the PN 9599 Foot
Switch Assembly (Model 360, Model 930, or Model 970) subsection of the operator’s manual.
To Next Page
Loading...