Carpenter Model 860 Material Coiling Unit
Carpenter Model 860 Material Coiling Unit • Phone: (315) 682-9176 • Fax: (315) 682-9160
Website: www.carpentermfg.com • Email: wire@carpentermfg.com
Revised 05/09/2024 Page 37
Model 93 or Model 97A Accessory Board Kit Installation
To interface the Model 860 with a Carpenter Mfg. Co., Inc. Model 93 or Model 97A, refer to the
following pages for detailed instructions on how to correctly install the accessory board kit in the
material processing machine. Carpenter PN 9583 accessory board kit is required.
To Next Page
Loading...