Carpenter Model 860 Material Coiling Unit
Carpenter Model 860 Material Coiling Unit • Phone: (315) 682-9176 • Fax: (315) 682-9160
Website: www.carpentermfg.com • Email: wire@carpentermfg.com
Revised 05/09/2024 Page 33
Section 9 – Warranty
Carpenter Mfg. Co., Inc. manufactures its products to be free from defects in materials and
workmanship. Should any defect occur within the warranty period, Carpenter Mfg. Co. Inc. will,
at its option, exchange or repair the defective device.
At the discretion of Carpenter Mfg. Co., Inc., repairs or adjustments to equipment under
warranty can be performed at our factory or at the customer location. In most cases a 1- or 2-day
turnaround time will be necessary to repair equipment at our facility. When equipment is
returned to our factory for repair or replacement, the customer is responsible for all freight
charges.
This is a limited warranty and is in lieu of all other representations and expressed and implied
warranties (including the implied warranties of merchantability and fitness for use). Under no
circumstances shall Carpenter Mfg. Co., Inc. be liable for any incidental or consequential
property damages or losses subsequent to misuse or improper maintenance of this equipment.
The following are not covered by the latter warranty:
• Consumable parts (blades, belts, guides, springs, inserts, stripping wheels, etc.)
• Cosmetic problems (nicks, scratches, etc.)
• Damages caused by any repairs or modifications by unauthorized personnel
• Damages caused by abuse
• Damages caused by shipping
• Damages caused by environmental and/or atmospheric conditions
• Damages caused by the use of contaminated compressed air
To Next Page
Loading...