Carpenter Model 860 Material Coiling Unit
Carpenter Model 860 Material Coiling Unit • Phone: (315) 682-9176 • Fax: (315) 682-9160
Website: www.carpentermfg.com • Email: wire@carpentermfg.com
Revised 05/09/2024 Page 29
Section 7 – Coiling Bowl Safety Feature
If contact is made with the Model 860 coiling bowl while it is coiling material, the unit will
immediately stop processing and will fault out. This is designed to ensure operator safety.
The material processing machine will stop and indicate a fault has occurred. To clear the fault,
power off the Model 860 and follow the instructions on the front panel of the material processing
machine. After at least ten seconds has elapsed, power on the Model 860 and press ENTER on
the material processing machine to return to the run screen to continue processing material.
To Next Page
Loading...