92 Installation and Programming Guide
7. For a standard installation set the schedule to a preset which is 24 hours every day,
holidays should NOT be ticked in this schedule. This will enable the first zone profile.
If you want the zone settings to change based on a schedule, then select the first
schedule here.
8. If you are setting up a keyswitch zone, then the user number field controls which user
profile will be used to arm/disarm. The keyswitch zone will report as default User 99.
9. If you are programming a second zone profile, then go to that now and repeat steps 4-
7.
Web Page
Next
• Zones are assigned to one or more Areas using Area Groups. If necessary, program
Areas and Area Groups, then assign an Area Group to each zone (step 6).
To Next Page
Loading...
