Carrier Standing Type Inverter Air Conditioner
28
Cleaning functional filters
● Before cleaning the functional filter, make sure to power off.
● If it is not possible to remove dust, replace it with a new one.
● Clean the functional filter with a vacuum cleaner once every three months, depending
on the level of pollution and the amount of time the unit is in use.
Note
Note
The specification of functional filter varies depending on the product model.
Filter purchase inquiry (Contact your local dealer.)
After cleaning, re-insert the functional filter into the filter frame.
Then, insert the filter frame into the unit.
Separate the functional filter from the filter frame.
Use a vacuum cleaner to clean the functional filter.
5
3
4
Functional filter
filter frame
fixing snap fits
MAINTENANCE
Separate the cover from the bottom of
the unit. Open both ends of the cover
and pull it forward.
Separate the filter frame from the
bottom of the unit. Lift the filter frame
to unlock it and pull it forward.
1
2
filter frame
fixing snap fit
To Next Page
Loading...
