Carrier Standing Type Inverter Air Conditioner
10m
below
Oil trap
Outdoor unit
Liquid loop
Liquid side
Gas side
Install
per
10m
Indoor unit
Outdoor unit
Indoor
unit
Spring
R100mm or longer
Pipe length/height
Bending the pipe
1
2
Install the oil trap/liquid loop
appropriately depending on the location
of the indoor/outdoor unit.
● The minimum/maximum pipe length is 3.5m and 15m respectively.
● Correctly bend it only once. If you bend it more than once, it can damage the pipe.
● The minimum bending radius is 100mm.
Maximum permitted height is 10m.
INSTALLATION
( )
32
To Next Page
Loading...
