Carrier RG2059 Series - Figure 5.16 Generator Shockmounts

T-361 5–16
Figure 5.16 Generator Shockmounts
NOTICE
SST is an abbreviation for 300 Series Corrosion Resistant Steel.
Loctite #242 or an equivalent product should be used on ALL hardware shown in Figure 5.17.
GENERATOR
Lock-nut (5/8)
Plain Washer (5/8)
Plain Washer (5/8)
Mounting Base
Screw (5/8)
Mounting Base
FRAME
Shockmount
INSTALL MOUNT WITH LARGER
FLARE AT TOP AS SHOWN
Lock-nut (3/8)
Plain Washer (3/8)
Shockmount
Flat Washer
Lock Washer (1/2)
Flat Washer (1/2)
Plain Washer (3/8)
Screw (3/8)
Screw (1/2)