12
4.8 - Main menu
parameters, including general parameters, inputs and outputs
status, etc.
• To access the menu, press the Main menu button
located in the upper-left part of the Synoptic screen.
•
the icon corresponding to the desired category.
• To go back to the Synoptic screen, press the Home
button .
General parameters screen
general unit parameters.
• To access the General parameters screen, go to the
Main menu and select General Parameters
(GENUNIT).
• Press the Up/Down
screens.
Press the Up/Down buttons
the screens.
4.9 -
menu, etc.
• Main
menu button located in the upper-left part of the
Conguration
Menu.
•
• Press the Up/Down
screens.
the SaveCancel button
4.10 -
by the control.
1 Forced value
2 Set force
3 Auto (force removed)
Press to set or to remove the forced point.
2 3
1
To Next Page
Loading...
