13
1.1.2 Symbol Display
Sensitivity calibration mark
Stability mark Communication mark
Graphic display Auto print mark Standby mark Unit display
`
An example of “whole lighting” display.
Display Name Description
Stability symbol Indicates that the balance is stable. (*1)
Tare symbol Indicates that a Pretare value has been set.
Zero symbol
Indicates that Auto Zero is ON for the Application Measurement
function.
Weight symbol
Blinks when span calibration is necessary. This symbol continues to
blink until either a manual or automatic span calibration has been
made.
Number symbol Indicates numeric value entry.
Menu symbol Indicates that the menu lock is on.
*
Asterisk Indicates that the displayed numeric value is not a mass value.
Animal symbol
Illuminates when Animal Weighing is ON for the Application
Measurement function.
Auto-Memory &
Zeroing symbol
Illuminates when Auto-Memory and Zeroing are ON for the Application
Measurement function.
Memory symbol
Indicates that Net Total Weighing is ON for the Application
Measurement function.
Communication
symbol
Illuminates during communication to external equipment through the
RS-232C or DATA I/O connector.
BATT
Battery symbol
When the balance is operated with the optional battery pack, this
symbol illuminates to indicate that the battery voltage has dropped.
AP
Auto Print
symbol
Indicates that Auto Print is ON for the Application Measurement
function.
STAND-BY
Stand-by
symbol
Illuminates when the balance power is in the standby mode.
This symbol also illuminates when the Application Measurement
function has entered the standby mode.
To Next Page
Loading...
