32
Menu lock is on. Menu lock is off.
Note: Access is denied and
is displayed when the user attempts to
select a locked menu.
Use the following procedure to turn off the menu lock function and restore
access to the menus.
1) Disconnect power from the balance and wait 10 seconds. Reconnect
power to the balance.
2) When
is displayed, press the key.
3)
is displayed to indicate that the menu lock has been
turned off.
2.4.4 Last Menu Recall
This function is convenient when an application requires frequent changes to a
specific Menu Map item.
During mass display or menu selection, press and hold the
key for
approximately three seconds. The last Menu Map item that was changed or set is
displayed.
To Next Page
Loading...
