(1) IBM PC/AT and its compatible personal computers (D-sub 9-pin)
Personal computer side Balance side
FRAME SHIELD FRAME
(This wiring cable is not always necessary.)
(2) IEEE Standard (D-sub 25-pin)
Personal computer side Balance side
1 ------------ 1
2 ------------ 3
3 ------------ 2
4 ------------ 5
5 ------------ 4
6 ------------ 20
7 ------------ 7
20 ------------ 6
3.2.2 Data Format
The following explanation is applied when is selected.
For other formats, refer to the data corresponding to the compatible machine.
Note: ٱ indicates space code and <delimiter> indicates delimiter code.
(1) For the measured value`
First character: Minus: '-' Non-minus: space
2nd to 11th characters: Numeric values or " [", "]" are flushed right. The position of the decimal
point varies depending on the type of instrument.
12th to 13th characters: Unit such as gٱ or kg
14th to 15th characters: Delimiter
Note: When the delimiter is
or , the 13th character is not present.
When printing stability information, the following characters are put in front of the first character
To Next Page
Loading...
