45
2.9.3 Auto Zero
Select Menu Map item [41].
When the displayed value is within the Zero Range and the stability symbol has illuminated, zeroing
occurs automatically. The symbol appears in the display when the Auto Zero function is active.
Other keys function as expected with the Auto Zero function activated.
2.9.4 Auto Print
Auto Print function allows output of the data automatically without pressing the key for each
sample. The
symbol is illuminated when the Auto Print function is activated.
Six types of Auto Print are possible.
Menu Map item [42] (on positive load)
Load the sample when the value displayed is within the Zero Range.
When the stability symbol has illuminated and the positive displayed value
is more than 5 times the Zero Range, data is automatically output.
The next data output is not performed unless the display has returned to a
value within the Zero Range by unloading the sample or pressing the
key.
Menu Map item [43] (on positive or negative load)
Load or unload the sample when the displayed value is within the Zero
Range. When the stability symbol has illuminated and the displayed positive
or negative value is more than 5 times the Zero Range, data is automatically
output.
The next data output is not performed unless the display has returned to a
value within the Zero Range by unloading the sample or pressing the
key.
Menu Map item [44] (on positive load and on zero)
Load the sample when the value displayed is within the Zero Range. When
the stability symbol has illuminated and the positive displayed value is more
than 5 times the Zero Range, data is automatically output.
Unload the sample or press the
key. When the displayed
value is within the Zero Range and the stability symbol has illuminated, data
is output again.
Menu Map item [45] (on positive or negative load and on zero)
Load the sample when the value displayed is within the Zero Range. When
the stability symbol has illuminated and the displayed positive or negative
value is more than 5 times the Zero Range, data is automatically output.
Unload the sample or press the
key. When the displayed
value is within the Zero Range and the stability symbol ha illuminated, data
is output again.
To Next Page
Loading...
