CAS CBX - System Setting Menu; Date for the Built-In Clock; Time for the Built-In Clock; Display During Standby

53
2.11 System Setting Menu :
The SYSTEM SETTING menu is used to set the items that pertain to or are controlled by the balance.
2.11.1 Date for the Built-in Clock
1) Select Menu Map item [63].
2) Press the key.
3) Set the last two figures of the year, month and day, using the
and keys. Then
press the
key.
Example:
February 1st, 1997 Set as
. .
February 29th, 2004 Set as
. .
Note:
•
The built-in clock corrects for the leap year automatically.
•
The moment the key is pressed in step 2 above, seconds are set to zero. If the date
is set after setting the time, the second value will be incorrect. It is important to set the date first and
then the time, or to correct the seconds value using the ± second correcting function described later.
2.11.2 Time for the Built-in Clock
1) Select Menu Map item [64].
2) Press the
key.
3) Use the
key and keys to set the time in the 24 hour system, then press the
key.
Example: 1 o'clock 23 minutes in the afternoon Set as
:
Note: The moment the
key is pressed is 00 seconds.
2.11.3 Display During Standby
Determine what is to be displayed during a power supply standby.
Menu Map item [65]
Displays the time during standby.
Menu Map item [66] Displays the date during standby.
Menu Map item [67]
Displays nothing during standby.