56
2.12.4 Communication Speed
Select the communication speed (300, 600, 1200, 2400, 4800, 9600, 19200, or 38400 bps).
Number of xxx shows bps (bits/second). Baud rate and bps are the same value.
Set with Menu Map items [81] to [88].
2.12.5 Parity / Bit Length -
Select the parity and bit length.
Menu Map item [89]
No parity, 8-bit length
Menu Map item [90]
Odd number parity, 7-bit length
Menu Map item [91]
Even number parity, 7-bit length
2.12.6 Stop Bit －
Select the number of stop bits.
Menu Map item [92]
Stop bit 1.
Menu Map item [93]
Stop bit 2.
2.12.7 Delimiter
The "delimiter" is used to separate individual pieces of data or commands. Set the delimiter as
follows:
Menu Map item [94]
Set to CR(0DH).
Menu Map item [95]
Set to LF(0AH).
Menu Map item [96] Set to CR+LF(0D0AH).
Menu Map item [97]
Transfers the data directly to Microsoft®
Windows®. This is equivalent to pressing the Enter key of the personal
computer.
Menu Map item [98]
Transfers the data directly to Microsoft®
Windows®. This is equivalent to pressing the right cursor key of the
personal computer.
Note:
•
Section 3.2.4 "Windows® Direct".
When these Menu Map items are set, it is not possible to send commands to the balance from the
peripheral instruments. The personal computer and electronic printer cannot be used at the same time.
To Next Page
Loading...
