22
Symbols in the : Display
Press the
key when the following symbols are blinking to enter the
associated menu.
(Calibration) = Enters the menu related to span calibration.
(Graphic display) = Enters the menu related to the graphic
display, target and checkweighing.
(Environment) = Enters the menu related to the installation
environment and general operation of the balance.
(Application) = Enters the menu related to applications and
printing.
(Unit) = Enters the menu related to unit conversion.
(System) = Enters the menu related to the system (clock,
reports, and passwords).
(Communication) = Enters the menu related to communication
with a computer and software.
The stability symbol in the
: display indicates that
, , and are set.
To Next Page
Loading...
