65
3.2.4.2 Checking Operations
(1) Open the "Note pad" attached to Windows®* (or the application in use).
(2) Press the key on the balance.
(3)Verify that the numeric value displayed on the balance is displayed on the screen of personal
computer.
(4)End the operation using the standard ending procedure.
Windows®* = Windows 95, Windows 98, Windows Me, Windows 2000
3.2.4.3 Activate Windows
To ensure correct operation, activate Windows®* using the following procedure.
Procedure
(1) Disconnect the balance power supply.
(2) Activate Windows®* and wait until activation is complete.
(3) Plug the AC adapter into the outlet and turn ON the balance.
Note: Turning ON the balance before Windows®* is completely activated may cause incorrect
operation.
Note: This function may not operate on a PC on which a normal U.S. version of Microsoft
Windows®* does not operate. Some types of personal computers may not be able to use this function
or some features may be limited. CAS does not guarantee that this function can be used on all the PCs
without any problems currently or in the future.
• CAS is not liable for any direct or indirect problems caused by this function. It is recommended that
important data or programs on your PC be backed-up before using this function. For the operation of
Windows®* or the PC, refer to commercial tutorials or the appropriate instruction manual.
• It is necessary to have the "Accessibility Options" function of Windows®* installed on the PC. To
install "Accessibility Options", select "Start" -> "Setting" -> "Control panel" -> "Add /Remove
Programs" and open the "Windows Setup" tag. Place a check mark on "Accessibility Options." For
more information, see the Windows®* instruction manual.
• Once the serial key device is made effective, software which uses the RS-232C port on that PC does
not operate correctly, unless it is made ineffective again. If an external modem, plotter or etc. is
connected, remove the check mark placed on "Using the serial key device" and re-activate the OS
after connection to the balance is terminated.
To Next Page
Loading...
