CAS CI-2400BS - Indicator Test Modes

31
FUNCTION Hold start delay time(Only available in automatic hold)
DISPLAY DESCRIPTION
F16-00 Hold operates without delay time.
F16-07
If the weight change, hold will operate after
14 sec.
F16-15
If the weight change, hold will operate after
30 sec.
F16
SET
(00
15)
AUTOMATIC HOLD FUNCTION
FUNCTION Set initializing division (Only available in automatic hold)
DISPLAY DESCRIPTION
F17-01
If it is swang over 2 division, it will be
initialized.
F17-07
If it is swang over 14 division, it will be
initialized.
F17-15
If it is swang over 30 division, it will be
initialized.
F17
SET
(01
15)
FUNCTION Relay mode
DISPLAY DESCRIPTION
F20-00 Limit mode
F20-01 Limit type checker mode
F20
SET
(00
01)
RELAY FUNCTION