115
2.14 Programming Scale Configuration
2.14.1. Scale Configuration (Menu code 1800)
( MENU → 8. Scale Config )
This chapter explains how to configure the scale. The main menu of
Scale Configuration is shown as below.
2.14.2 Sale Mode (Menu code 1810)
( MENU → 8. Scale Config → 1. Scale Mode )
This Menu allows you to select the appropriate Sale Mode that you want the scale to
operate in. There are 7 different modes as explained in the table below.
▶ Sale Modes
No. Sale Modes Description
1 REG: Ticket & Floating Selecting Ticket and Floating Clerk Mode.
2 REG: Label Selecting Label Mode.
3 REG: Prepack Selecting Prepack Mode.
4 REG: Label & Floating Selecting Label and Floating Clerk Mode.
5 Manager Selecting Manager Mode
6 Repack
Selecting Repack Mode (In this mode, totals are not added to
the totals information file.)
7 Self Service & Label
Selecting Self Service Mode (In this mode, you can use
speed key and some keys. If you want to escape from Sale
Mode, press MENU key and SAVE key at the same time)
To Next Page
Loading...
Need help?
General
