2.13.5 Print Mode (Menu code 1731)
( MENU → 7. Print → 3. Printer Hardware → 1. Print Mode )
1. Select Print Mode
0 = Label Mode
1 = Ticket Mode
2 = Continuous Label Mode.
• Press “PRINT” to save.
2.13.6 Label Size/Ticket Size (Menu code 1732)
(MENU → 7. Print → 3. Printer Hardware → 2. Label Size )
This Menu allows you to program the width, height (length) and gap length for a label.
Depressing the TEST key will automatically measure and set the height and gap
length of the label. After pressing the TEST key you will need to quickly remove the
labels as they are issued.
• Note: In Ticket Mode, "Ticket Size" is
displayed instead of "Label Size" and "end
margin" is used instead of "gap length". The
TEST key has no function in this mode.
• In Continuous Label mode "Cont. Label
Size" is displayed and "end margin" is used
instead of "gap length". The TEST key has no
function in this mode.
You must press the SAVE key to save the
information and exit to the main Printer
Hardware menu. Depressing the ESC key will
return you to the main menu but will not save
any information.