173
3.13 Prepack Key
Pre-Pack Mode is very useful for back room applications. It provides a method of
increasing productivity by not requiring the operator to press the PRINT key for every
package. Instead the operator can concentrate on weighing, wrapping and labeling.
In Pre-Pack mode you can not select the Auto Mode, however the label will always
issue automatically. Pre-Pack Mode functions like Auto and Save Mode combined, the
PLU does not clear when the item is removed from the platter and the label is
automatically issued after the weight becomes stable.
To call up a PLU enter the PLU Number and press the PLU Key. You may also call up a
PLU by using the Speed Keys. (refer to chapter 3.4)
EX) Calling up a PLU using a Speed Key.
Speed Key #1 = Onion Unit Price = $1.50
1. Press PREPACK key and then Speed Key
to call up PLU."
Replace Figure showing Key "A" with
one labeled ONION.
2. Place the item(s) on the platter.
3. Label is issued automatically.
To Next Page
Loading...
Need help?
General
