50
2.2.7 List Group (Menu code 1222)
( MENU → 2. PLU Data Table I → 2. Group → 2. List )
1. Set the group range that you wish to
see
EX) Groups 1~10
Press Print Key to List Groups on screen.
After Groups are listed on the screen,
pressing the TEST key will print the Groups.
Note: Printing should be done on continuous label
stock.
2.2.8 Delete Group (Menu code 1223)
( MENU → 2. PLU Data Table I → 2. Group → 3. Delete )
1. Enter group number
EX) Delete group 1.
Note: There is no confirmation request when
deleting a Group. Pressing the PRINT key will
cause the Group entered to be deleted.
2.2.9 Tax Rate (Menu code 1230)
( MENU → 2. PLU Data Table I → 3. TAX Rate )
You can use tax number when you create PLU.
Note: Tax Rate programming requires that a Level 3 Password be entered. See Section
2.14.6 User/Security Configuration.