83
2.8 Country Programming
2.8.1 Country (Menu code 1340)
( MENU → 3. PLU Date Table II → 4. Country )
This menu is used to program Country information. Country information is used when
programming Traceability Numbers. Therefore Country information programming
should be completed prior to programming Traceability.(Menu 1330)
2.8.2 New/Edit Country (Menu code 1341)
( MENU → 3. PLU Date Table II → 4. Country → 1. New/Edit )
▶You can press the SAVE key at anytime to save the current data and if
you want to exit without saving, press the ESC key.
1. Enter country number
• This value can be from 1 to 999.
EX) Country No. = 1
2. Enter country name
EX) Name = KOREA
3. Exit menu
• If you want to exit without making any
changes, press ESC key.
To Next Page
Loading...
