2.15.11 Z1/Z2 Report (Menu code 1620/1640)
( MENU → 6. Report → 2. Z1 Report / 4. Z2 Report )
If you select menu code 1620, you will see
following screen.
If you want to print and clear the data, press
TEST key. The scale shows following screen.
To print and clear, press “1” key. The scale
shows following screen.
When printing is done, Z1 data is cleared
and you return to the main Report Menu.
Sales data is same with X1 report
Note1: If the setting of Parameter 598 (Print when Z Report clear) is set to NO, the Z Report will not
print out but the totals will be cleared.
Note 2: If the setting of Parameter 595 (Individual clear Z report) is YES then you will be able to clear
Scale, PLU, Misc. PLU, Group Department, Hourly and Clerk sales data separately.
Caution: Using this function may cause reports to vary with the scale report.
To Next Page
Loading...
