40
36. Link PLU1 Dept
• If you do not want to use, enter 0
EX) Do not use Link PLU1 Dept
37. Link PLU1 No.
• If you do not want to use, enter 0
EX) Do not use Link PLU1 No
38. Link PLU2 Dept
• If you do not want to use, enter 0
EX) Do not use Link PLU2 Dept
39. Link PLU2 No.
• If you do not want to use, enter 0
EX) Do not use Link PLU2 No
2.1.2 Create Non-Weight PLU (Menu code 1120)
( MENU → 1. PLU → 2. New/Edit )
※ Not all programmable PLU Items are shown in this example.
◆ You can press the SAVE key at anytime to save the current PLU data
and if you want to exit without saving, press the ESC key.
1. Enter Department No. / PLU No.
• Department should be set previously
EX) Department # = 1. Default
PLU # = 2
To Next Page
Loading...
