3.15 How to Change Sell By Date/Time
This function is used to change the Sell By Date and the Sell By Time for a programmed PLU.
Note: To use the Change Sell By Date or Time function you must program the EDIT SELL key
using Menu 1880 (chapter 2.14.22).
To call up a PLU enter the PLU Number and press the PLU Key. You may also call up a PLU by
using the Speed Keys. (refer to chapter 3.4)
Ex. Calling up a PLU using a Speed Key.
Speed Key #1 = Onion, Unit Price = $1.50
1. Press Speed Key
2. Press the EDIT SELL key.
Enter the new Sell By Date and Sell By Time.
3. Press PRINT key to complete saving.
Note: The new Sell By Date and Sell By Time will
become permanent changes after pressing
the PRINT key.
To Next Page
Loading...
