CAS CL series - List Barcode (Menu Code 1262); Delete Barcode (Menu Code 1263)

5
8
No. Symbol Description
24 % • % : print next fixed character*
25 0~9 • numbers
*% : It is used to enter characters therefore you canot use this to enter numbers.
5. Exit Menu
• If you want to exit, press ESC key.
2.2.23 List Barcode (Menu code 1262)
( MENU → 2. PLU Data Table I → 6. Barcode → 1. List )
1. Set the list range
• Set the range of barcode that you wish to
check
EX) Barcodes 1~10
• Press Print Key to List Barcodes on screen.
After Barcodes are listed on the screen,
pressing the TEST key will print the
Barcodes.
Note: Printing should be done on continuous
label stock.
2.2.24 Delete Barcode (Menu code 1263)
( MENU → 2. PLU Data Table I → 6. Barcode → 3. Delete )
1. Enter barcode number to delete
EX) Delete barcode 1.
Note: There is no confirmation request when
deleting a Barcode . Pressing the PRINT key
will cause the Barcode entered to be deleted.