CAS CL series - Editing PLU (Menu Code 1120); Sample Printing (Menu Code 1170); Listing PLU (Menu Code 1150)

43
2.1.4 Editing PLU (Menu code 1120)
( MENU → 1. PLU → 2. New/Edit )
◆ You can call up existing PLU information for edit.
2.1.5 Sample Printing (Menu code 1170)
( MENU → 1. PLU → 7. Sample Printing )
• Used to enable printing a sample PLU label.
EX) If set to Yes, when editing an existing PLU or creating a new one, depressing
the SAVE key will result in a label being printed with that PLU's information on it.
2.1.6 Listing PLU (Menu code 1150)
( MENU → 1. PLU → 5. List )
Note: Finding PLU; You need to know department # and PLU #.
1. Enter Department No.
• Enter department number that you wish to
see
EX) Department No. 1
2. Enter PLU Range
EX) PLU 1~10
• Press Print Key to List PLU's on screen.
After PLU's are listed on the screen pressing
the TEST key will print the PLU's.
Note: Printing should be done on continuous
label stock.