6.6.1 Data transmitting protocols (only for PC or micro-printer)
Only when TR．A．P or TR．m．P TR . SER has been chosen, this setting will
be available.
Press
or
key to choose the available protocols: Prot1 (MWP), Prot2
(22byte) or Prot3 (MW-II)
Press ENTER key to confirm the choice and move to next setting: USB tRN; press
Back key to return to last step.
Note:
Once Prot3 has been chosen, press ENTER key to move to PCC (Printing
control code) setting:
Press
or
key to choose it to be on or off. (Default: off).
Press ENTER key to confirm the choice and move to next setting: USB tRN; press
Back key to return to last step.
To Next Page
Loading...
