CAS XE 6000 - Data Transmitting Mode (for USB)

4
7
6.8 Data transmitting mode (for USB)
Only when USB has been chosen to be on, the setting is available.
Press ENTER key to enter into USB data transmitting:
Press
or key to choose the transmitting mode:
tr.a.p: Transmitting the data to PC or mic-printer (Automatically)
tr.m.p: Transmitting the data to PC or mic-printer (Manually)
tr.ser: Transmitting the data continuously
(Default: tr.ser)
Press ENTER key to confirm the choice and move to next setting: Prot; or press
Back key to return to last step.
Press
key to move to next setting menu when not change the current setting.