48
Press
or
key to choose the available protocols: Prot1 (MWP), Prot2
(22byte) or Prot3 (MW-II)
Press ENTER key to confirm the choice and move to next setting: BaUd rate; press
Back key to return to last step.
Note:
Once Prot3 has been chosen, press ENTER key to move to PCC (Printing
control code) setting:
Press
or
key to choose it to be on or off. (Default: off).
Press ENTER key to confirm the choice and move to next setting: BaUd rate; press
Back key to return to last step.
To Next Page
Loading...
