108
OTHER RECORDING FUNCTIONS
Using Auto Bracketing with the Focus
Distance as the Variable (Focus
Bracketing)
With focus bracketing, you can specify recording of three
images or five images, each of which is recorded using a
different focus distance setting. You can also specify the
range of change for the focus distance (shift range). This
comes in handy when performing the hard-to-focus macro
and telephoto recording.
• You can specify the shift range you want for focus
bracketing
1.
In a REC mode, press [ BKT].
2.
Use [] and [] to
select “AFB”, and
then press [].
3.
Use [] and [] to specify the number of
images you want to record.
• You can specify either three images or five images.
4.
Use [] and [] to specify the shift range.
5.
When the settings are the way you want,
press [SET].
• This causes the “AFB” indicator to appear on the
monitor screen.
6.
Press the shutter button to record.
• Pressing the shutter button once records the number
of images you specified.
NOTE
• The recording speed is the same as that for high
speed continuous shutter mode (page 102).
To Next Page
Loading...
Need help?
General
