96
OTHER RECORDING FUNCTIONS
Setting Exposure Settings Manually
In the M mode (manual exposure), you can adjust shutter
speed and aperture manually.
1.
Align the mode dial
with “M” (Manual).
2.
Use [왖] and [왔] to select the aperture value in
the exposure panel, and then use [왗] and [왘]
to change the setting.
Aperture value
Shutter speed
Aperture value*
Depth of Field
Wide Small
F2.8, 3.2, 3.5, 4.0, 4.5, 5.0, 5.6, 6.3, 7.1, 8.0
Shallow Deep
* The above values are full wide angle optical zoom.
Aperture values are different at other optical zoom
settings.
Shutter speed
Movement
Slow Fast
BULB, 60 seconds 1/2000 second
Blurred
Stopped
3.
Use [왖] and [왔] to select the shutter speed
value in the exposure panel, and then use [왗]
and [왘] to change the setting.
• If you are using manual focus (page 85), you can
also use [왖] and [왔] to select “FOCUS” (manual
focus adjustment), and then use [왗] and [왘] to focus
manually.
4.
Press the shutter button half way.
•
This causes the camera to adjust focus automatically.
5.
When the image is focused, press the shutter
button all the way down to record.
To Next Page
Loading...
Need help?
General
