141
OTHER RECORDING FUNCTIONS
Specifying Power On Default Settings
The camera’s “mode memory” feature lets you specify the
power on default settings individually for the flash mode,
focus mode, white balance mode, ISO sensitivity, AF Area,
Metering, Self-timer, Cont./BKT, Flash Intensity, digital
zoom mode, manual focus position and zoom position.
Turning on mode memory for a mode tells the camera to
remember the status of that mode when you turn off the
camera, and restore it the next time you turn the camera
back on. When mode memory is turned off, the camera
automatically restores the initial factory default setting for
the applicable mode.
The following table shows what happens when you turn
mode memory on or off for each mode.
Function
Flash
Focus*
1
White Balance
ISO
AF Area
Metering
Self-timer
Cont./BKT
Flash Intensity
Digital Zoom
MF Position
Zoom Position*
2
On
Setting when
camera is
turned off
Off
Auto
Auto
Auto
Auto
Spot
Multi
Off
1 Shot
0
On
Last Auto Focus
position that was in
effect before you
switched to manual
focus
Wide Angle
*1 The focus mode setting is not remembered for the
Movie mode. PF (Pan Focus) is automatically selected
in the Movie mode.
*2 Only the optical zoom position is remembered.
To Next Page
Loading...
Need help?
General
