163
PLAYBACK
Checking the Focus of a Recorded Image
You can use the following procedure to enlarge a recorded
image to check its focus.
1.
In the PLAY mode,
use [] and [] to
display the image
whose focus you
want to check.
2.
Press [PREVIEW].
• This displays a window that shows an enlargement
of the image, with the point that was focused upon in
the center.
3.
Use [], [], [], and [] to scroll the image
on the monitor screen.
4.
To return the image to its normal size, press
[PREVIEW].
IMPORTANT!
• You can use the above procedure to check the focus
of snapshots and audio snapshots only.
• You cannot check the focus of images recorded by
any other camera model.
To Next Page
Loading...
Need help?
General
