PRINTING IMAGES
214
Printing Precautions
• See the documentation that comes with your printer for
information about print quality and paper settings.
• Contact your printer manufacturer for information about
models that support PictBridge and USB DIRECT-PRINT,
upgrades, etc.
• Never disconnect the USB cable, or perform any camera
operation while printing is in progress. Doing so causes a
printer error.
5.
To print again, repeat the above from step 3.
• A message appears on the monitor screen, followed
by the DPOF setting screen (page 208), if there are
no DPOF settings currently configured on the
camera to control the printing operation. If this
happens, configure the required DPOF settings and
then try printing again.
6.
The camera will turn off automatically when
printing is complete. After this happens,
disconnect the USB cable from the camera.
To Next Page
Loading...
Need help?
General
