GETTING READY
42
3.
Swing the battery cover closed, and then slide
it in the direction indicated by the arrow.
IMPORTANT!
• Use only the special NP-40 rechargeable lithium ion
battery to power this camera. Use of any other type
of battery is not supported.
To remove the battery
1.
Open the battery cover.
2.
Pull the stopper in the direction indicated by
the arrow.
• This will cause the battery to come part way out of
the slot.
Stopper
3.
Release the stopper and pull the battery from
the camera.
• Take care so you do not drop the battery.
To Next Page
Loading...
Need help?
General
