GETTING READY
55
IMPORTANT!
• Recording images without configuring the clock
settings causes incorrect time information to be
stored with image data. Be sure to configure the
clock settings before using the camera.
• A built-in backup battery retains the date and time
settings for about two days if the camera is not
supplied with power. The date and time settings will
be cleared when the backup battery goes dead. The
following are the conditions when power is not being
supplied to the camera.
— When the rechargeable battery is dead or
removed from the camera
— When using the AC adaptor to power the camera,
disconnecting the AC adaptor
• The date and time setting screen will appear on the
monitor screen the next time you turn on the camera
after the date and time settings have been cleared. If
this happens, reconfigure the date and time settings.
• If you make a mistake when setting the language or
clock with the following procedure, you will need to
use the camera’s menu to individually change the
language (page 197) or clock (page 192) settings.
To configure display language and clock
settings
1.
Press the power button to turn on the camera.
2.
Use [], [], [], and
[] to select the
language you want,
and then press [SET].
: Japanese
English : English
Français : French
Deutsch : German
Español : Spanish
Italiano : Italian
Português : Portuguese
: Chinese (Complex)
: Chinese (Simplified)
: Korean
To Next Page
Loading...
Need help?
General
