95
OTHER RECORDING FUNCTIONS
2.
Use [왖] and [왔] to select the shutter speed
value in the exposure panel, and then use [왗]
and [왘] to change the setting.
Shutter speed
Movement
Slow Fast
BULB, 60 seconds 1/2000 second
Blurred
Stopped
• You could also use [왖] and [왔] to select “EV Shift”
here, and then use [왗] and [왘] to specify an
exposure compensation value (page 88).
•
If you are using manual focus
(page 85)
, you can also
use [왖] and [왔] to select “FOCUS” (manual focus
adjustment), and then use [왗] and [왘] to focus
manually.
3.
Press the shutter button half way.
• This causes the camera to configure the aperture
value automatically in accordance with the shutter
speed you selected. Then it focuses the image.
• The shutter speed and aperture values on the
monitor screen will turn amber when you press the
shutter button half way if the image is over-exposed
or under-exposed.
4.
When the image is focused, press the shutter
button all the way down to record.
To Next Page
Loading...
Need help?
General
