To Next Page

To Previous Page

132

SETTINGS & TOOLS

NOTE

Above step automatically turns on your handset’s Bluetooth

power,

even if it is turned off.

4. The handset will prompt you with the following message on the

main display: PLACE DEVICE YOU ARE CONNECTING TO IN

DISCOVERABLE MODE. Press the Center Select Key [OK].

5. The device will appear in the ADD NEW DEVICE menu. Select

the device you wish to pair with, then press the Center Select Key

[PAIR].

6. The handset may prompt you for the passkey. Consult the

Bluetooth

accessory instructions for the appropriate passkey

(typically “0000”—4 zeroes). Enter the passkey, then press the

Center Select Key [OK].

NOTES

You do not need to input the passkey for pairing when the

passkey of the Bluetooth

Headset or hands-free kit is 0000.

For pairing with devices that do not have pre-defined passkeys,

it is recommended that you use at least 8 characters as the

passkey.

•

7. The handset will prompt you with the following message on the

main display: Before Connecting To [Device Name]. If you would

like to always confirm before connecting to the Bluetooth

device,

select Always Ask, then press the Center Select Key [OK]. The

handset will prompt you with the message Connect to [Device

Name]. Select Yes, then press the Center Select Key [OK]. If

you do not wish to confirm every time before connecting to the

Bluetooth

device, select Always Connect, then press the Center

Select Key [OK].

Casio G'zOne Ravine User Manual

Questions and Answers: