160
SETTINGS & TOOLS
NOTE
When PTT mode is On, you cannot change this setting.
NAM Selection
To select the handset’s NAM (Number Assignment Module) if the
handset is registered with multiple service providers:
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
Phone Settings, NAM Selection.
2. Select NAM 1 or NAM 2, then press the Center Select Key [SET].
NOTES
When PTT mode is On, you cannot change this setting.
When you change this setting, the handset will restart.
•
•
Motion Detection
To turn the Motion Detection feature On or Off:
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
Phone Settings.
2. Select Motion Detection, then press the Center Select Key [OK].
3. Select one of the following settings, then press the Center Select
Key [OK].
G’zGEAR / My Pics/Videos
4. Select On or Off, then press the Center Select Key [OK].
Call Settings
The Call Setup menu allows you to designate how the handset
handles both incoming and outgoing calls.
To Next Page
Loading...
Need help?
General
