48
CONTACTS
Phone Numbers with Pauses
Pauses are used for automated systems (e.g. voicemail or calling
cards). Insert a pause after a set of numbers then enter another set.
The second set of numbers is dialed after the pause. This feature
is useful for dialing into systems that require a code. There are two
different types of pauses you can use when registering a phone
number:
Wait (W): The handset stops dialing until you press the Left Soft
Key [Release] to advance to the next number.
2-Sec Pause (P): The handset waits 2 seconds before
automatically dialing the next set of numbers.
Registering a Phone Number with Pauses
1. From idle mode, enter the phone number.
2. Press the Right Soft Key [Options], then press Add 2-Sec
Pause or Add Wait.
3. Enter the additional number(s) (e.g. PIN number or credit card
number).
4. Press the Left Soft Key [Save], then press Add New
Contact.
5. Complete any additional fields and press the Center Select Key
[SAVE].
Accessing the Contacts submenu
1. From idle mode, press the Center Select Key [MENU], select
Contacts, then press the Center Select Key [OK].
2. Select a submenu:
New Contact/Contact List/Groups/New PTT Contact*/PTT
Contact List*/PTT Groups*/Backup Assistant/Speed Dials/In
Case of Emergency/My Name Card
* These options are available only when the PTT feature is turned
on.
•
•
To Next Page
Loading...
