51
CONTACTS
3. Select the phone number, then press the Send Key to make the
call.
NOTE
Selecting the Contact entry and then pressing the Send Key will
dial the Default Number of the Contact entry automatically. If
multiple numbers are saved in the Contact entry, select the number
you want to dial, then press the Send Key.
Viewing Location of Home Address or Work Address
on the Map
Once you have added the Home Address or the Work Address to your
Contact List, you can view the location of those addresses on the map
using the VZ Navigator
®
.
1. From idle mode, press the Center Select Key [MENU], select
Contacts, then press the Center Select Key [OK]. Press
Contact List.
2. Select the Contact entry, then press the Center Select Key [VIEW].
3. Select the Home Address or Work Address, then press the Right
Soft Key [Navigate].
4. Follow the on-screen prompts.
NOTES
To use VZ Navigator, you must set Location to On. See page 155.
Download, subscription, and airtime required for use; only in
National Enhanced Services Coverage Area; accuracy and
completeness of information is not guaranteed; information about
the location of the device will be used to deliver service.
•
•
To Next Page
Loading...
Need help?
General
