Reference
EN-199
Drive Simulates the drive of a musical instrument amplifier.
Type Drive Type Selects the drive type.
*4
(page EN-200)
Gain Gain Adjusts the driver input signal gain. 000 - 127
Output Level
Level Adjusts the drive output level. 000 - 127
Wet Level Wet Level Adjusts the level of the effect sound. 000 - 127
Dry Level Dry Level Adjusts the level of the direct sound. 000 - 127
Amp Cab Simulates an amp without distortion-generating drive and speaker
cabinet.
Type Type Selects the amp cabinet type. (page EN-201)
Variation Variation Selects a variation that changes the setup of the
currently selected amp. The number of
variations (page EN-201) depends on the amp
type.
1 - 4
Wet Level Wet Level Adjusts the level of the effect sound. 000 - 127
Dry Level Dry Level Adjusts the level of the direct sound. 000 - 127
Vibraphone Tremolo An effect that simulates the tremolo effect of vibraphone.
Rate LFO Rate Adjusts the LFO rate. 000 - 127
Depth LFO Depth Adjusts the LFO depth. 000 - 127
Input Level Input Level Adjusts the input level. 000 - 127
Wet Level Wet Level Adjusts the level of the effect sound. 000 - 127
Dry Level Dry Level Adjusts the level of the direct sound. 000 - 127
Mono IR Simulates the acoustic characteristics by monaural IR (Impulse
Response) data.
Categ Category Selects the IR data category.
*5 *7
Type Type Selects the IR data type.
*6 *8
Wet Level Wet Level Adjusts the level of the effect sound. 000 - 127
Dry Level Dry Level Adjusts the level of the direct sound. 000 - 127
Effect
Description Settings
Display
Parameter
Name
To Next Page
Loading...
Need help?
General
