P-121
QT-6600 Programming Manual
4-3-13 Programming tare table
This procedure is used for programming tare table.
Operation: <PGM3> → 3.Key Feature → 13.Tare Table→ Select tare
——— Tare description (within 16 characters)
——— Tare weight (0.000 ~ 99.999)
Memory No. 1
Tare Description TARE 01
Tare Weight 12.345
4-3-14 Programming additional item program
This procedure is used for programming time item.
Operation: <PGM3> → 3.Key Feature → 14.Additional item Program → *Select item
——— Time item / normal item
——— Interval (00 ~ 99 minutes)
——— No. of Interval for the first price change
——— First changing price (0.00 ~ 9999.99)
——— No. of Interval for the second price change
——— Second changing price (0.00 ~ 9999.99)
——— Color code (refer to 4-1-21)
* Item selection: There are 4 methods to select items.
1. Select by cursor.
2. Press the appropriate PLU key directly.
3. Designate PLU record No. or random No.
4. Using character search: You can search an item by its name.
Press <SEARCH> key, enter a few characters and press the <Enter> key.
The terminal searches the item includes these characters.
After character search, press <UP ARROW> / <DOWN ARROW> shows the next/
previous candidate.
Memory No. 1
Item is Timeitem NO
Interval (Minutes) 0
Change Price After (Interval) 0
New Interval Price 0.00
Change Price After (Interval) 0
New Interval Price 0.00
Use Last Interval Price NO
Color for Timeitem 0
To Next Page
Loading...
Need help?
General
