Casio QT-6600 Programming Manual

P-123
QT-6600 Programming Manual
4-4-2 Programming batch maintenance
Operation: <PGM3> → 4.Scanning system → 2.Batch maintenance → Scan item
——— Add/ change = “Change”, Delete = “Delete”
——— 0 ~ 16 characters
——— 0 ~ 999999
——— Max. 99 department
——— Refer to department section.
——— Non PLU item should be programmed as “OPEN PLU”.
Refer to 3-3-18. Executing batch maintenance file of the reference manual.
4-4 Scanning system
4-4-1 Programming direct maintenance
Operation: <PGM3> → 4.Scanning system → 1.Direct maintenance → Scan item (code <OBR>)
——— 0 ~ 16 characters
——— 0 ~ 999999
——— Max. 99 department
——— Refer to department section.
——— Non PLU item should be programmed as “OPEN PLU”.
PLU code 49177008>>>>> PL=1
Descriptor Scan PLU001
Price 0.00
Group Link --------
Dept Link --------
Sub-Dept Link --------
Taxable status Non Tax
Scan Mix&Match --------
Negative Price NO
Zero Unit Price NO
Open PLU NO
Item Follows Department NO
Complusory Multiply NO
Not Allowed Multiplication NO
PLU code 49177008>>>>> PL=1
Delete/Change Change
Descriptor Scan PLU001
Price 0.00
Group Link --------
Dept Link --------
Sub-Dept Link --------
Taxable status Non Tax
Scan Mix&Match --------
Negative Price NO
Zero Unit Price NO
Open PLU NO
Item Follows Department NO
Complusory Multiply NO
Not Allowed Multiplication NO

Casio QT-6600 Specifications

General

Brand	Casio
Model	QT-6600
Category	Touch terminals
Language	English