Casio QT-6600 Programming Manual

P-50
Program 3
4-1-9 Programming tax table
Operation: <PGM3> → 1.Machine Feature → 9.Tax Table → Select Tax Table
——— Rate; 0.0001 ~ 9999.9999 % (Use Decimal point key)
——— Maximum value; 0.00 ~ 99.99
——— Cut off/Round off/Round up/Round up to two decimal
point
——— Not calculate / Table / Table & Add on / Add in (VAT) /
— Tax on Tax / VAT & VAT/ Add in (VAT on Tax)/ VAT &
VAT2
—— Sum of Cyclic Patterns, No. of Cyclic Values, Sum of Non
Cyclic Values, Actual Values… See the following pages.
—
cf. VAT & VAT:
1. Sharing rate of the primary taxable amount → enter “Tax rate” field.
2. Actual tax table for primary tax table code → enter “Actual value (1)” field.
3. Actual tax table for secondary tax table code → enter “Actual value (2)” field.
Tax Table (1)
Tax Rate(%) 8.1250
Maximum Table Amount 0.00
Rounding Round off
Singapore Rounding Yes
Calculation Type Add in(VAT)
Sum of Cyclic Patterns 0
No. of Cyclic Values 0
Sum of Non-Cyclic Values 0
Actual Values(01) 0
Actual Values(02) 0
:
Actual Values(60) 0
4-1-8 Programming table analysis
Operation: <PGM3> → 1.Machine Feature → 8.Table Analysis
——— Descriptor and parameter (refer the worksheet below)
Worksheet for table analysis program
Description Choice Program code
Always “00”
Minimum check No. of the table group
(“0” means “1.”)
Maximum check No. of the table group
(“000000” means no programming.)
Significant
numbers
Significant
numbers
;;
D
14
D
13
::::::
D
12
D
11
D
10
D
9
D
8
D
7
::::::
D
6
D
5
D
4
D
3
D
2
D
1
Table Analysis
TBL01 00000000000000
TBL02 00000000000000
TBL03 00000000000000
TBL04 00000000000000
TBL05 00000000000000
TBL06 00000000000000
TBL07 00000000000000
TBL08 00000000000000
TBL09 00000000000000
TBL10 00000000000000
Note:
This programming is only effective, if the check-# is 6-digit long.

Casio QT-6600 Specifications

General

Brand	Casio
Model	QT-6600
Category	Touch terminals
Language	English